W200 Series Smart Watch

Discover the W200 Series Smart Watch — a rugged industrial IoT wearable supporting 4G Cat.1, LoRa, UWB, GPS, BLE, and multi-sensor health monitoring. Ideal for worker safety, healthcare, logistics, and indoor high-precision positioning.

  • Model: W200PG
  • Location: GPS+BDS+Wifi+BLE+LBS
  • IOT: 4G Cat.1
  • SIM: Nano SIM Inside
  • Weight: 49g
  • Size/: 46 x 52 x 15mm
W200 Series Industrial Smart Watch | 4G/LoRa/UWB Multi‑mode Wearable

W200 Series Industrial Smart Watch
4G · LoRa · UWB · BLE – Choose the right model for each zone

One hardware platform, six radio variants. From wide‑area LoRa to centimetre‑accurate UWB – the W200 series adapts to your site, not the other way around.

Why multi‑site safety programs fail with one‑size‑fits‑all wearables

We’ve seen a logistics company deploy 4G smartwatches across their warehouse – only to realise that 4G doesn’t penetrate the steel‑reinforced basement. Another petrochemical plant tried LoRa badges but couldn’t locate workers inside process units where they needed room‑level accuracy. The real problem isn't the hardware quality. It's forcing one radio protocol into every zone.

The W200 series solves this with a modular hardware platform. Under the W200 series, you can choose from multiple models: 4G Cat.1 for voice and wide coverage, LoRaWAN for low‑power wide‑area, UWB for centimetre‑grade indoor RTLS, or hybrid combinations. All models share the same form factor, 22mm strap ecosystem, charging accessories, and cloud API – so you can mix them across the same site without management headaches.

The W200 series gives you six distinct models (see table below) – each optimised for a specific environment.

What makes W200 different from generic smartwatches

1️⃣ Modular connectivity – not locked in

Under the W200 family, you get six purpose‑built models: W200PG (4G + GPS + BLE) for outdoor workers with voice calls; W200PGU (4G + UWB) for indoor/outdoor hybrid sites; W200PL (LoRaWAN) for wide‑area tracking without cellular bills; W200PLU (LoRa + UWB) for RTLS with LoRa backhaul; W200PU (UWB only) for pure indoor precision; and W200L (LoRa only) for ultra‑low‑power logging. Each shares the same rugged DNA.

2️⃣ Multi‑mode positioning that actually works indoors

GPS alone fails inside buildings. The W200 series combines GPS/BDS, Wi‑Fi, LBS, BLE, and UWB. On UWB‑equipped models (W200PGU / W200PLU / W200PU), you get 10–30cm accuracy inside warehouses or factories. That's the difference between knowing a worker is "somewhere on the third floor" vs "standing next to reactor #3".

3️⃣ Medical‑grade sensors, not afterthoughts

We use the Goodix GH3011 sensor on most models – the same chip found in clinical‑grade wearables. It delivers SpO2, body temperature, heart rate, blood pressure, pedometer, and sleep monitoring. For safety managers, continuous health telemetry is just as important as location.

4️⃣ Built for the job site, not the gym

IP67 rating (two‑colour mould + full glue sealing – no screws) means dustproof and waterproof to 1 metre for 30 minutes. IPX5 on some variants. Lightweight (39–49g). 1.22" TFT display that you can read under direct sunlight. Capacitive touch on most models. And 450mAh battery with magnetic charging.

W200 series model selection guide

All models share the same rugged design, 450mAh battery, magnetic charging, and BLE5.1. Use the table below to pick the right connectivity for each zone. This table lists the main variants under the W200 series – if you need a custom combination, contact us.

ModelTechPositioningSpeakerSensorsSIMTouchWeightBest for
W200PG4G Cat.1GPS+BDS+WiFi+BLE+LBSYesGH3011 fullNano SIMYes49gOutdoor lone worker, voice + health tracking
W200PGU4G + UWBGPS+BDS+BLE + UWBYesGH3011 fullNano SIMYes49gIndoor/outdoor hybrid sites, RTLS + voice
W200PLLoRaWANGPS+BDS+BLE+UWBNoGH3011 fullNo SIMYes49gWide area, no cellular bill, long battery
W200PLULoRa + UWBUWB + BLENoGH3011 fullNo SIMYes49gPure indoor RTLS with LoRa backhaul
W200PUUWB onlyUWB + BLENoNo oxygen sensorNo SIMNo39gLow‑cost indoor RTLS, no health sensors
W200LLoRaGPS+BDS+BLENoGH3011 fullNo SIMNo39gUltra‑low‑power wide‑area tracking

* GH3011 full sensor suite: SpO2, temperature, heart rate, blood pressure, pedometer, sleep. W200PU omits oxygen sensor but retains other health metrics per the original spec. W200L and W200PU have no touch panel per the original table.

Common technical specifications – all W200 models

Display1.22 inch TFT, 240×240 pixels, sunlight readable
Battery450mAh lithium‑ion, magnetic pogo‑pin charging, full charge in ~2 hours
WaterproofIP67 (two‑colour mould + glue sealing) / IPX5 on some variants
Operating temp-20°C to +55°C
Dimensions (W×H×D)46 × 52 × 15mm (14.5mm on W200L/W200PU), 39–49g depending on model
GNSSGPS + BeiDou + GLONASS (assisted), plus Wi‑Fi and LBS for indoor fallback
ConnectivityBLE 5.1 (broadcasting, beacon, host connection), optional 4G/LoRa/UWB modules
Sensors3‑axis accelerometer, fall detection, Goodix GH3011 (SpO2/temp/HR/BP/sleep) on most models
AdditionalVibration motor, physical SOS key, 2 side keys, 22mm interchangeable straps (nylon/velcro/silicone/magnetic/NFC)

What the W200 series is NOT (honest limitations)

Not a consumer fitness tracker – The UI is industrial‑focused, not pretty. You won't get animated workouts or social sharing.

UWB requires infrastructure – Centimetre‑level accuracy (10–30cm) works only where you've installed UWB anchors. Out of the box, models without UWB fall back to GPS/BLE/Wi‑Fi positioning.

4G models need a nano SIM – We don't embed eSIM. You provide your own SIM with a data plan. LoRa and UWB models have no SIM slot.

No onboard storage for offline maps – Location is streamed to the cloud. If the network drops, the watch buffers data but doesn't store offline maps.

Touch panel is capacitive – Works fine with bare fingers or thin gloves. Heavy‑duty insulated gloves won't register touches – use the physical buttons instead.

Battery life varies wildly with UWB – With UWB active at 1Hz refresh, expect 1–2 days. Turn UWB off (or pick a non‑UWB model) and you'll get 4–6 days. The 450mAh battery is modest by design to keep weight low at 39–49g.

Real deployment: 600 workers across a multi‑floor hospital

A large teaching hospital in Germany deployed the W200 series for two very different use cases. For 400 porters and maintenance staff moving across 12 floors, they used W200PLU (LoRa + UWB) – UWB anchors on each floor provided 30cm accuracy for equipment tracking, while LoRa backhaul eliminated cellular dead zones inside elevator shafts. For 200 security guards who needed voice communication outdoors, they used W200PG (4G + GPS). All watches share the same 22mm straps and charging suitcases. The hospital cut response time to "man‑down" alarms from 8 minutes to under 90 seconds.

Another client, a petrochemical plant in Shandong, deployed 800 W200PGU watches for outdoor operators and indoor UWB tracking around reactors. The combination of 4G for voice and UWB for zone‑level alerts reduced false alarms by 70% and gave safety officers centimetre‑level location inside hazardous zones.

Ready to deploy a single platform across multiple zones?

Request a sample kit or a technical consultation. We'll help you map the right W200 model to each zone of your site – from wide‑area LoRa to centimetre‑accurate UWB.

Request pricing & sample →

Mobile: [+86] 189-7480-9810 (supports calls, WhatsApp, and WeChat)

Email: sales@cumond.com

Website: www.iot-solutionhub.com

+86-18974809810

Monday - Friday 8:30 - 18:00 (UTC +08:00)

Contact Us
Mobile
Products
Solutions
Contact